
Test bucket
€43 net
plus VAT
12.5 kg for a sample area of approx. 3.5 m². Same material as in the bag.
- If you order a pallet or a starter set afterwards, we will credit you the €43.
Tested as a system by IBF Troisdorf · Fire protection class A1
Our partners






Mix, pour in, level off. That is all there is to it.
Many people close the channels with tile adhesive or leftovers from the cart. That often holds for a while. Then cracks appear, the floor layer does not accept the substrate, and the complaint lands with whoever did the milling.
Tile adhesive is not built to restore the load-bearing capacity of the screed.
Without a matched system, the lasting bond to the old screed is missing.
If it cracks, you have nothing in hand that shows you worked properly.


| Feature | Tile adhesive / improvisation | Neolite Fix Rohrverschluss |
|---|---|---|
| Developed for the milled channel | no | yes |
| Tested for this use | no | IBF Troisdorf |
| Reinforcement mesh required | almost always | no |
| Work steps | several | two, incl. levelling compound |
| Proof for the customer and the following trades | none | Test certificate, data sheet, system instructions |
With regular purchase (min. 1 pallet per month). One pallet covers approx. 278 m².
That is less than what a single rework costs you on site. And you can bill the channel sealing as a separate item.

€43 net
plus VAT
12.5 kg for a sample area of approx. 3.5 m². Same material as in the bag.
For the first job

€1,199 net
plus VAT
40 bags (1,000 kg, approx. 278 m²) + mixing bucket + levelling squeegee. Free delivery to the kerbside.

€1,184.40 net
plus VAT
40 bags of resupply. Free shipping from 4 pallets.
Order palletProcessed according to the system instructions and still a problem? Our application technician will take a look.
We show you Neolite Fix Rohrverschluss directly on one of your construction sites.
The whole system from a single source: primer, floor filler BS 25, edge insulation strip To the shop
approx. 40 N/mm²
Compressive strength approx. 40 N/mm², flexural tensile strength approx. 7 N/mm². The stability of the screed is restored.
IBF Troisdorf
Test certificate from IBF Troisdorf. A document for your customer file, in case someone asks.
3 to 6 hours
Walkable in 3 to 6 hours, depending on temperature. Ready for floor covering after approx. 12 hours. The floor layer can start the next day.
approx. 7 to 8 litres
Approx. 7 to 8 litres of water per bag: mix, pour in, level off. No mesh, no special tools.
Vacuum and prime the channels (Strasser DTG-P Tiefengrund)

Mix Neolite Fix Rohrverschluss: approx. 7 to 8 litres of water per 25 kg bag, stir lump-free for at least 1 minute

Fill the channels without voids, embed the heating pipe completely, level off

Apply levelling compound according to the system instructions (Strasser PLAN BS 25)

Managing director & founder · XB Fußbodenheizung
Specialist in underfloor heating in existing buildings. Co-developed the Neolite system and uses it on his own construction sites.
Managing director & founder · Haussanierung NRW
Expert in renovating existing buildings in NRW with fixed routines on site. Co-developed the Neolite system.
Application technician, over 30 years of practice
“Direct line to the expert”
The Neolite system is a purpose-developed system solution for the professional sealing of milled channels in underfloor heating systems in existing buildings. It was developed for everyday life on real construction sites, not for laboratory conditions.
Our products are aimed at specialist companies that install underfloor heating by the milling method and at specialist trade retailers, plus tradespeople who find unfinished or improperly built floor structures and need a safe solution for repair.
For the durable, clean sealing of milled channels and for the targeted repair of minor screed damage in connection with underfloor heating systems.
Yes, as a system. IBF Troisdorf tested milled screed samples that had been sealed with primer, Neolite Fix Rohrverschluss and floor levelling compound (test report M 39/26). The product was also tested in practice over a longer period and its formulation deliberately developed further.
Because conventional solutions often consist of individual products that are not matched to each other. The Neolite system is designed as a closed overall system in which all components are matched to each other.
With a compressive strength of approx. 40 N/mm², designed for use in thermally stressed floor structures.
Yes. Through clearly defined processing, reproducible results and documented system properties, the liability risk is significantly reduced.
Approx. 3.6 kg/m², one bag covers approx. 7 m².
Ready for floor covering after approx. 12 hours.
Yes. Processing is designed for efficiency and reduces unnecessary work steps.
No, a mixer is enough; bucket and squeegee are in the starter set. No special tools are required for the application. For optimal and efficient work we recommend our starter set, which contains all the necessary tools and enables a direct, smooth start with processing.
Yes. We provide clear step-by-step instructions, technical data sheets and application videos.
The system is designed so that typical sources of error are minimised and corrections are easier than with many conventional solutions.
Cement and concrete based; anhydrite only after approval. For calcium sulphate (anhydrite) screeds, suitable substrate preparation is required after approval.
Yes. Minor screed damage can be repaired in a targeted and lasting way. Cracks and defects are closed reliably and repaired properly in technical terms.
Yes, we send you the test certificate from IBF Troisdorf on request, just message us on WhatsApp. You can download the technical data sheet (PDF) and the safety data sheet (PDF) directly (both in German).
All components are technically matched and documented. It is not a collection of individual products but a working overall system.
Yes. You get competent support from experienced specialist staff.
Questions about processing are answered by our application technician Mr. Borkowski, fundamental technical questions by managing director Kamil Bregulla.
Yes. If needed and if it makes economic sense, a technologist can also support you on site. Talk to us, for example with a that you request via WhatsApp.
Through our web shop: shop.neoliteshop.de.
Yes. We offer structured starter packages for new or switching businesses. They contain all the necessary components and tools to get started.
This is arranged individually and can be clarified when ordering.
Pallet free to the kerbside, free shipping from 4 pallets.
By WhatsApp, by email to kontakt@neoliteshop.de, by phone on 0160 95544343 or via (opens the form).
One test bucket, one sample area, then you know.
P.S. Questions about the substrate? Send Mr. Borkowski a photo on WhatsApp. You get an answer from a practitioner, not from a call centre.
Tools and machines for milling contractors: Hemming screed milling machines, diamond milling discs, industrial vacuums, SPIT hand milling machine To the shop